[Medium Glass] Problem 1: Some glass slag will appear during the walking process or when the transmission stops.
This situation may be due to the following three factors: 1) The nozzle cover is damaged. 2) The aluminum groove depth detecting probe is drawn to the glass while walking. 3) The forward force of the squeegee or rubber sheet is too large.
Solution: 1) Very simple, just change a jacket. 2) Adjust the position of the probe so that it walks in the middle of the aluminum slot. 3) Adjust the speed of the advance cylinder to the appropriate. Glass slag can be avoided.
Question 2. In the process of rubberizing, sometimes the action after starting is not finished.
Appearance factors: 1) It may be because the fiber head in front of the machine head has something to block, such as (glue or the like). 2) It may be due to the loose or tilted fiber head nut. 3) There are dirty things on the surface of the glass. 4) The detection distance is too small, and there are fluctuations in the walking to affect the detection.
Solution: If you encounter the above problems, the solution is very simple; 1) Clean the fiber head, you can. 2) Tilt or loose, you need to fix it and adjust it. 3) Dirty things on the surface of the glass will affect the glue, etc., so clean the surface of the glass. 4) Adjust the appropriate detection distance.
Question 3. There is always some inconsistency in the work process, and there is no coordination between the actions.
Factors that cause problems: 1) Incorrect parameter settings 2) Aging of pneumatic system components.
Solution: 1) Reset the parameters or use the original parameters. 2) If the pneumatic system components are aging, replace them with a new one.
Problem 4. The motor is unstable and fast and slow.
Problem factors: 1) The aluminum trough is not straight. 2) The guide rail is not straight or the sliding bearing is damaged.
Solution: 1) The aluminum trough should be straight. 2) If it is damaged or the guide rail is not straight, it can be replaced.
Carbon Aramid Hybrid Fabric,Carbon Aramid Blended Fabric,Aramid Fiber Hybrid Fabric,Carbon Aramid Fibre Cloth
Jiangyin Phecda New Material Technology Co., Ltd , https://www.nbphecdacomposite.com